Minggu, 29 April 2018

Sponsored Links

Global Paperboard Market 2018- RockTenn, Iggesund, International ...
src: askthereporter24.com

Paperboard is a thick paper-based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker (usually over 0.30 mm, 0.012 in, or 12 points) than paper and has certain superior attributes such as foldability and rigidity. According to ISO standards, paperboard is a paper with a grammage above 250 g/m2, but there are exceptions. Paperboard can be single- or multi-ply.

Paperboard can be easily cut and formed, is lightweight, and because it is strong, is used in packaging. Another end-use is high quality graphic printing, such as book and magazine covers or postcards. Paperboard is also used in fine arts for creating sculptures.

Sometimes it is referred to as cardboard, which is a generic, lay term used to refer to any heavy paper pulp-based board, however this usage is deprecated in the paper, printing and packaging industries as it does not adequately describe each product type.


Video Paperboard



History

In 1817, the first paperboard carton was produced in England. Folding cartons first emerged around the 1860s and were shipped flat to save space, ready to be set up by customers when they were required. 1879 saw the development of mechanical die cutting and creasing of blanks. In 1911 the first kraft sulphate mill was built in Florida. In 1915 the gable top milk carton was patented and in 1935 the first dairy plant was observed using them. Ovenable paperboard was introduced in 1974.


Maps Paperboard



Terminology and classification

Terminology and classifications of paperboard are not always uniform. Differences occur depending on specific industry, locale, and personal choice. In general, the following are often used:

  • Boxboard or cartonboard: paperboard for folding cartons and rigid set-up boxes
    • Folding boxboard (FBB): a bending grade capable of being scored and bending without fracture
    • Chipboard: a recycled, low quality board
      • White lined chipboard (WLC): a white, often clay-coated chipboard
    • Kraft board: a strong virgin fiber board often used for beverage carriers. Often clay-coated for printing
    • Laminated board: a lamination of paperboards and other materials, for example liquid packaging board
    • Solid bleached board (SBB) or solid bleached sulphate (SBS): clean white board used for foods etc. Sulphate refers to the kraft process
    • Solid unbleached board (SUB): board made from unbleached chemical pulp
  • Containerboard: a type of paperboard manufactured for the production of corrugated fiberboard
    • Corrugated medium: the inner fluted portion of corrugated fiberboard
    • Linerboard: a strong stiff board for one or both sides of corrugated boxes. It is the flat covering over the corrugating medium.
  • Other
    • Binder's board: a paperboard used in bookbinding for making hardcovers.

Spartan Paperboard Company - Paperboard Products
src: www.spartanpaper.com


Production

Fibrous material is turned into pulp (paper)/pulp and bleaching of wood bleached, to create one or more layers of board, which can be optionally coated for a better surface and/or improved visual appearance. pulp board are produced on pulping machines that can handle higher grammage and several plies.

Raw materials

The above-mentioned fibrous material can either come from fresh (virgin) sources (e.g. wood) or from recycled waste paper. Around 90% of virgin paper is made from wood pulp. Today paperboard packaging in general, and especially products from certified sustainable sources, are receiving new attention, as manufacturers dealing with environmental, health, and regulatory issues look to renewable resources to meet increasing demand. It is now mandatory in many countries for paper-based packaging to be manufactured wholly or partially from recycled material.

Raw materials include:

  • Hardwood: C. 0.05 inches (1.3 mm) in length e.g. Birch which has short fibres. It is generally more difficult to work with; however, it does provide higher tensile strength, but lower tear and other strength properties. Although its fibres are not as long and strong as those in softwood, they make for a stiffer product defined by some stifness tests. Hardwood fibres fill the sheet better and therefore make a smoother paper that is more opaque and better for printing. Hardwood makes an excellent corrugating medium.
  • Softwood: C. 0.13 inches (3.3 mm) in length e.g. Pine and spruce which have typically long fibres and make superior paperboard in services where strength is important. Softwood makes excellent linerboard.
  • Recycled: Used paper is collected and sorted and usually mixed with virgin fibres in order to make new material. This is necessary as the recycled fibre often loses strength when reused; the added virgin fibres enhance strength. Mixed waste paper is not usually deinked (skipping the deinking stage) for paperboard manufacture and hence the pulp may contain traces of inks, adhesives, and other residues which together give it a grey colour. Products made of recycled board usually have a less predictable composition and poorer functional properties than virgin fibre-based boards. Health risks have been associated with using recycled material in direct food contact. Swiss studies have shown that recycled material can contain significant portions of mineral oil, which may migrate into packed foods. Mineral oil levels of up to 19.4 mg/kg were found in rice packed in recycled board.
  • Others: It is also possible to use the fibres of Sugarcane Bagasse, Straw, Hemp, Cotton, Flax, Kenaf, Abaca and other plant products

Pulping

Two principal methods for extracting fibres from their sources are:

  • Chemical pulping uses chemical solutions to convert wood into pulp, yielding around 30% less than mechanical pulping; however, pulp made by the kraft process has superior strength
  • Thermo mechanical pulp is a two-stage process which results in a very high yield of wood fibres at the expense of strength.

Bleaching

Pulp used in the manufacture of paperboard can be bleached to decrease colour and increase purity. Virgin fibre pulp is naturally brown in colour, because of the presence of lignin. Recycled paperboard may contain traces of inks, bonding agents and other residue which colors it grey. Although bleaching is not necessary for all end-uses, it is vital for many graphical and packaging purposes. There are various methods of bleaching, which are used according to a number of factors for example, the degree of colour change required, chemicals chosen and method of treatment. There are three categories of bleaching methods:

  • Bleaching by delignification using chlorine gas, which is a method that has been largely replaced by procedures which are gentler to the environment such as the use of oxygen as a replacement for the chlorine gas.
  • Bleaching by oxidation using chemicals such as chlorine dioxide, hydrogen peroxide or sodium hypochlorite.
  • Bleaching by reduction using chemicals such as sodium bisulphite.

Plies

Multi-ply paperboard generally has higher creasing and folding performance than single-ply as a result of layering different types of pulp into a single product. In cases where the same kind of pulp is being used in several layers, each separate layer is treated and shaped individually in order to create the highest possible quality.

Coating

In order to improve whiteness, smoothness and gloss of paperboard, one or more layers of coating is applied. Coated paper is usually made up of:

  • a pigment, which could be china clay, calcium carbonate or titanium dioxide, usually a combination of two
  • an adhesive or binder as styrene-butadiene emulsions or starches and water.

Additional components could be OBA (optical brightening agents).


Spartan Paperboard Company - Paperboard Products
src: www.spartanpaper.com


Grades

The DIN Standard 19303 "Paperboard - Terms and grades" (Publication date : 2005-09) defines different grades of paperboard based on the surface treatment (first letter), the main furnish (second letter) and the colour (non-D grade) or bulk (D grade only) (numbering).

Example: GC1 would be a "pigment coated", "virgin mechanical pulp" board with a "white reverse side". Often the used paperboard type would be FBB, which was coated on both sides.


Spartan Paperboard Company - Paperboard Products
src: www.spartanpaper.com


Common terms

Basis Weight (US): Is the weight in 1,000 square feet (93 m2) of paperboard.

Brightness: Brightness is a technical term that is defined as the amount of blue-white light that a paper reflects. This property is very subjective and individual to each buyer and end use, as skin colour and food are better reproduced on 'warm' (yellow) whites and not blue whites.

Grammage: The grammage of the paperboard is assessed in accordance ISO 536. Grammage expresses mass per unit area and is measured in g/m2.

PH: Surface pH is measured on a water extract and is on a scale of 0-14. 0 is acidic, 7 is neutral and 14 is alkaline.

Stiffness: Stiffness is one of the most important properties of paperboard as it affects the ability of cartons to run smoothly through the machine that erects, fills and closes them. Stiffness also gives strength and reduces the propensity of a carton to bulge under the weight of settling flowable contents such as cereals.

Although most paper strength properties increase with increasing sheet density, stiffness does not. A rule of thumb is that stiffness is proportional to the 1.6 power of sheet caliper.

The species of fiber used has an effect on stiffness, other things being equal. Northern softwood species impart superior stiffness compared to southern softwoods.

Other factors which affect board stiffness include coatings and moisture content.

Smoothness: Smoothness is particularly important when being used for printing, the smoother the paperboard, the better the image quality, because of better ink coverage. Smoothness is measured using air leak methods - the greater the rate of air leakage, at a specific air pressure, from under a cylindrical knife placed on the surface, the rougher the surface.

Caliper/Thickness: In the United States caliper is usually expressed in thousandths of an inch (0.001") or points, where a sheet of paperboard with a thickness of 0.024" would be 24 points. In Europe it is often sold in g/m2, however the thickness of the board is measured in micron (?m).

Paperboard also tends to be referred to with thickness rather than weight.

Whiteness: It refers ideally to the equal presence of all colours, because a truly white sheet will reflect all wavelengths of visible light equally.


Paper & Paperboard Packaging - Most Effective Packaging Solution ...
src: i2.wp.com


Paperboard industry

The paperboard sector is mainly looked at in conjunction with the paper industry. The Paper & Paperboard market size (2007) had a value of 630.9 billion USD and a volume of 320.3 million metric tons. Of that market 40.1% is European. About 50% of all produced paper is used for packaging, followed by printing and writing. According to ProCarton, the consumption of paper and paperboard seem to correlate with economic trends (GDP). Sales of carton in Europe sum up to around 8 billion Euros worth. Over 1,100 printers produce 5.4 million tonnes of cartonboard yearly. Cartons make up one third of paper and board packaging and 15% of all packaging. A bit more than half (54%) of the European carton is produced using recovered fibre or waste paper. The paper and paperboard industry is quite energy and capital intensive. Just a coated board machine itself can cost around 90 - 120 million Euros (about 125 - 166 million USD in 11/2011). Economies of scale apply, because of which a few large players often dominate the market place. E.g. in North America the top 5 producers have a market share of 85%.


Spartan Paperboard Company - Paperboard Products
src: www.spartanpaper.com


See also

  • Coated paper
  • Papermaking
  • Slip sheet

Wine Paperboard Carton Carriers (50 units) â€
src: cdn.shopify.com


References


Paperboard Shoebox Style Box | Vulcan Information Packaging
src: vulcaninformationpackaging.com


Further reading

  • Brody, A. L., and Marsh, K, S., Encyclopedia of Packaging Technology, John Wiley & Sons, 1997, ISBN 0-471-06397-5
  • Soroka, W., Fundamentals of Packaging Technology, IoPP, 2002, ISBN 1-930268-25-4

White Paperboard Carton Carriers (6 Pack) (150 units) â€
src: cdn.shopify.com


External links

  • TAPPI--Technical Association of the Pulp and Paper Industry
  • 'Paper thickness cross reference guide

Source of the article : Wikipedia

Comments
0 Comments